Results 13 to 13 of 30
Change view: View multiple images at a timeView text onlyView text only

Tall case clock

Origin: England, Lancashire, Ormskirk
OH: 82"; OW(hood): 25"; OD(hood): 14 1/4"
Oak, glass; brass, iron and steel.
Museum Purchase
Acc. No. 1954-995
Case: broad, flat, multi-molded cornice atop square hood; front of hood composed of central, square glass panel bordered by band of half-round molding; glass flanked by three-quarter twisted and baluster-turned columns; front of hood is hinged on right column, opens to adjust dial; "1699" carved into fret above dial; sides of hood plain except for small door in left side; large, cove molding beneath hood, and a smaller, bead molding below; long, plain trunk with plain sides; long door in front surrounded by band of half-round molding with central, oval, bulls eye glass surrounded by half round molding; small, brass drop knob at center left; applied molding at base of trunk on front and sides above broader molding separating trunk from plain, square base which terminates in applied, plain base molding.

8 ¾” square brass dial. Central portion engraved with tulips and foliage. Chapter ring with Roman numeral hours with interspersed engraved fleurs-de-lis and minute markings at outer edge with Arabic markings at five minute intervals. Initials "JB" just above VI in chapter ring. Lead spandrel ornaments at corners composed of winged cherubs with foliage.

Movement description:
Thirty hour brass time and strike lantern style weight-driven movement measuring 6” H x 5 7/16” W. Clock has an anchor-recoil escapement regulated by a seconds beat pendulum. A count wheel strike sounds the hours on a large 5.3” diameter cast bell. The strike hammer is inside the bell.

All time and strike train wheels have four-arm crossings. The movement has front, middle, and rear plates which are thin brass slats. They are fastened in position to upper and lower horizontal brass plates via steel wedges. The top plate is .105” - .120” thick. The bottom plate is .105” - .110” thick. Four corner pillars secure the horizontal plates. The movement assembly is free standing on rounded brass feet at the base of the pillars below the lower plate. Brass finials adorn the tops of the pillars above the top plate. The bell stand is composed of four iron supports which mount to each of the brass finials. An iron horizontal loop projects from the top center of the back of the top plate to facilitate wall hanging. A pair of wall standoff spikes protrude from the lower rear of the rear cast iron panel.

The overall length of the pendulum is 44 1/8”. The pendulum rod is steel. The bob is cast iron filled brass shell. It is 2.9” diameter and 0.8” thick at its center. The movement is powered by a single weight and a continuous cord with counterweights. The weight is cylindrical brass shell with a cast in metal hook on the bowed top cover. It is 2 3/8” diameter, 6.5” long, and weighs 10 pounds.
Mark(s):"1699" carved into fret above dial; "JB" engraved on base of dial.